Backup Data Seed Pixel Roll 1000ct DC12V/5V 4pin WS2811 RGB IC Addressable Led light IP65

Description:

DC12V Signal break-point continuous transmission Pixel

Dual-Signal(with backup data wire)
Signal break-point continuous transmission. If one pixel is damaged, the following LEDs still work

Specifications:

• Working Input Voltage: DC12V.
• Protocol: We use MW1856MA ic (Same protocol as WS2811),choose WS2811 ic on setting page.

• Color Order: RGB

• SMD: SMD3248
• Output Power: 0.1W/pc led.
• Out R/G/B output current: 8.5mA
• Wire: 7X0.14 Thick wire, 4PIN Black/Clear wire (V+,DATA,Backup DATA,GND)
• LED Space: 2inch,4inch
• View Angle: 360 degree.
• Long Life: more than 50000 hours.
• Working Tempreture: -20~50°.
• Waterproof level:IP65 Waterproof
• Warranty: 2 Years.

Power Injection suggestion:

Warm Tips: Because of voltage drops, if LED quantity above 200-300LEDs, you can not light it up without power injection, so need to cut them to use.

• (2inch) 5cm LED space strings: 20LED/meter, 1LED/pixels, suggest to add voltage at every 200 LED
• (4inch) 10cm LED space strings: 10LED/meter, 1LED/pixels, suggest to add voltage at every 200 LED

This is the Roll with LED on it, not include male/female connectors and controller, power supply…. You should buy these components separately.

• Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.

• Control mode: SPI serial protocol, compatible with WS2811/1903/16703/mobile APP controller/SD card controller.

• DIY Controllers: Each pixel can have its own color and brightness as your wish.

• Compatible with Arduino, Raspberry Pi, Teensy, T1000S,K1000C etc programmable controllers.

Support SP110E SP105E SP108E SP110E SP601E etc Bluetooth APP IR controllers, CSY07 CSY08 X2 SP106E SP107E SP601E SP608E SP611E etc music bluetooth APP controllers,SP511E SP501E etc smart WiFi Alexa music Controllers.